Invisible zips

This link is the method by By Hand London blog that we already wrote about on this blog:

http://byhandlondon.com/blogs/by-hand-london/11628353-inserting-an-invisible-zipper-the-definitive-tutorial

And Catherine pointed us to this one that emphasises matching patterns, stripes, plaids or other lines and shapes across the zip:

http://www.craftsy.com/blog/2014/10/zipper-seam/


Invisible zips are also called concealed zips, this is what they look like:

http://www.jaycotts.co.uk/search?type=product&q=invisible+zip

You can also get a transparent nylon zip! Who knew...

28 rather neat sewing hacks

Some of these sewing hacks are pretty nifty.  I particularly like No 21 (to prevent button hole butchery), No 22 which I desperately need, and No 17*:

28 Sewing Hacks That Will Change Your Life

When considering tip No 2, I would strongly advise to keep magnets away from your PC, laptop and other electronic devices: you don't want to wipe them.

*: You can squeeze a third pencil in between these two to get a wider seam allowance.


Do you know of more tips like these?  Have you tried any tips and hacks like these and how did they work for you?

Bias tape on

This is a really good demonstration on how to use store bought bias tape to finish off raw arm hole edges:

Sewaholic's 'Finishing of armholes with bias tape'

It makes a lot of sense to use tape cut on the bias because it smooths itself around curves a lot more than tape cut on the grain would ever do, even if you were to iron it to within an inch of its life - straight grain tape would still pucker and misbehave.

I bought this kind of bias tape in a few colours, the one that is folded in at both edges - and I never knew what to do with it because it seemed to me that you would want it folded over just once with the crease running down the very centre.  I think I was thinking of using the tape as binding rather than as a facing.  Aha!

This makes a lot more sense.  Very glad I found this blog post.

Jaycotts.co.uk is a good site to get your supplies from

What kinds of projects have you used bias tape for?  Do you use it like a facing (on the inside of the garment) or like binding (visible on the outside of the garment too).

Please post in the comments, and better yet!  Why not do a short blog post about your project and show us how you used bias tape?  We would love to see!

Let's bring this blog to life again - now that summer and the holidays are over.

Looking forward to hearing from you!

A short one, two links

As promised in the headline, I quickly just wanted to share two links.

I came across this interesting web page where a few pattern making and couture techniques are explained. For example, just click on "pattern making techniques" and you'll see three articles about sleeves. http://thecuttingclass.com/post/3599880487/patternmaking-cut-and-spread-darts. I could spend hours and hours looking for inspiration ...

And I wanted to share my favourite link about pockets, those little gems I need to remember when cutting my fabric:
http://www.behind-the-hedgerow.com/2013/06/04/top-10-awesome-pockets-and-a-few-tutorials/. And, of course, the hint to our current sewalong: http://www.meetup.com/dressmakers/events/207867752/

See you

Four kinds of finishing seams

This is an interesting blog posts about different kinds of finishing seams.  Four of them to be precise.  There are another few mentioned in the comments.

Do check it out: I want to be a turtle -Notionally Speaking: Finishing 

I don't agree that bias binding is a quick method, but maybe you get quicker with practice?  Love an overlocked or a French seam.  But then again the Hong Kong (bias strip) seams do look very nice!  Just make sure to use tape from a really thin fabric.  I wonder if organza would work?  Might be too slippery to work with though.

What's your favourite kind of seam finishing?

Link to a great invisible zip tutorial

This is a great tutorial on how to insert an invisible zip.

Actually, the whole By Hand London blog is great. Do check it out.

Do make sure you use a zip that's at least 4-5cm (around two inches) longer than the opening you want.  The lower end will dangle on the inside of your skirt but this is much preferable to messing around with pulling the zip pull up while you're in the middle of stitching along the sides. With a dangly end you can stitch each side all the way down in one go.  It makes sense once you try this!

Leave the back centre seam unsewn (if you are going to insert the zip into the back centre seam of course).

You need an invisible zip sewing machine foot.  Inserting an invisible zip without this is the proverbial pain in the backside.  Once you own one you'll be forever grateful that someone had the good sense to invent them.

Try pressing the zipper teeth aside (as per this tutorial), I am told it makes stitching easier and more accurate.

This tutorial also shows very clearly where you need to start closing the back centre seam once the zip is in.  Lots of tutorials don't show this, which is why I was never that clear about what you're supposed to do at this point.

The description says to start the back seam about a half centimetre away from where you stitched before.  That's half a centimetre horizontally away from the stitching line, not vertically as I first thought.  The photo thankfully clears up that potential confusion.

If back-stitching isn't suited to your fabric because it makes the end of the stitching line too bulky: reduce your stitch length to the minimum your machine will give you (around 1mm or otherwise 1.1mm) and use this for up to half an inch, then increase the stitch length back to normal. The resulting tiny stitches will hold your thread.  You can take the thread ends back below the end of the stitching line and back stitch them by hand a couple of times in a suitable place. If this will show through you can try to whipstitch the ends around your stitching line (on the inside)

Some great tips for sewing accuracy

I just came across this collection of tips on how to sew more accurately:

Tips for accurate sewing

This is posted on TheSewingDirectory.co.uk site - this lists lots of classes, courses and workshops and also shows some menu items in the navigation bar that I haven't checked out yet: Events, Fabric Sales, Projects, Reviews, Interviews and the Techniques section that the above link goes to, and a few more.

Well worth checking out.

The blogger who wrote the Sewing Accuracy article is Sarah Flynn from FairyFaceDesigns blog. She does some great quilts, ie patchwork and quilting.  Check out her cushion covers!  They look like excellent stash busters when you have a few scraps that are too nice to throw out and a half meter or so of another fabric for the back.

She also does some sewing, like this excellent tutorial for a pencil case, so cute! Or these baby leggings, even more cute!  All together now: awww......


Back to the article on the sewing directory.  What I particularly liked was her emphasis of using a dry iron (no steam) to just press (not iron) your fabric while you are constructing your project.  She feels that steam distorts seams and makes accurate sewing rather more difficult.  It's an interesting thought.  I tend to spray a bit of water onto hard to tame areas but not so much overall.  That might be a good thing now that I really think about it.

Her point on starting with an accurately cut seam allowance is a very good one. 

I hope you enjoy Sarah's tips.  

What kinds of things have  you come across that make it easier to sew accurately?  Please share any and all tips in the comments!

Sarah Flynn from FairyFace Designs - See more at: http://thesewingdirectory.co.uk/news/2012/03/23/tips-for-accurate-sewing/#sthash.p7qblTS5.dpuf

Sarah Flynn from FairyFace Designs - See more at: http://thesewingdirectory.co.uk/news/2012/03/23/tips-for-accurate-sewing/#sthash.p7qblTS5.dpuf

Turn out perfect collar corners

Here is the link to the 'How to turn your collar points so that they're perfect' tutorial that I promised to post at the Sew a Detachable Collar session on Monday 3 March.

The Off The Cuff tutorial

I don't think that you need quite as long a thread as shown here, a bit shorter is fine too. 

While the collar is still inside out and hasn't been turned yet: only the thread loops should be showing outside the whole thing.  If you can see the two ends of thread and the loop is hidden inside the collar layer sandwich, that's the wrong way round (ask me how I know. I've done this wrong on every single collar I sewed up as samples on Sunday. Yes, every single one).

Once you turn the collar out through the gap left in the stitching, you should then gain access to the two loose ends of the thread.  You want to pull at both of them at the same time - just like the tutorial emphasises.

You can apply this trick to every type of garment where you need to turn a corner inside out. You could even use a couple of thread loops on a strong curve to turn that out if you feel it'll be difficult to do, on say the end of a rounded lapel that has no point but a sharp curve?  Or perhaps the end of a fabric tube that you sew shut, that kind of thing.  Those long, thin tubes of fabric are often turned inside out with a plastic gadget that acts a bit like a needle.  Thread loops are as good as that gadget, and definitely much better than a safety pin, which is what I used to use.

I had a problem with cutting into the thread when trimming the corners - you want to make sure to hold the thread loop out of the way when it comes to trimming.  Or insert the thread after sewing with the help of a darning needle, that works very well too!

After turning with the thread loops still attached

Let us know of your experience turning collar points.  Have you tried this technique and what do you think?  Do you do something different, and how are you finding it?  Please let us pick your brain for further insights into other ways of doing this!


Re stitching along the top and outside edges of a collar: I have seen more than one tailor/dressmaker sew off the edge of the fabric and sew each seam of the collar in separate goes.  I am not quite sure how different this is to pivoting at the corner and sewing without cutting the thread.  Does anyone have any insights into this?